
Add to Cart
TDD FHSS 100km UAV Video Transmitter Wireless Networking Ethernet Transceiver
Key Features:
Overview:
Hincn HCL605 UAV video transmitter is specificallly designed to achieve long range wireless transmission of video data (two way data link). It operates in the 600MHz or 1.4GHz frequency bands, and employs frequency hopping spread spectrum technology (FHSS) to ensure better stability of signal communication.
Technical Specifications:
TDD FHSS 100km UAV Video Transmitter Wireless Networking Ethernet Transceiver | |
Modulation | TDD OFDM |
Frequency | 566~678MHz and 1420~1530MHz |
Bandwidths | 1.4/ 3/ 5/ 10/ 20/ 40MHz |
Throughput | Maximum 100Mbps |
RF transmission Power | 5W *2( Each 5W of the 2 antennas) |
Constellation | QPSK,16QAM,64QAM, self-adaption |
Sensitivity | -102dBm(1Mbps at 20MHz) |
IP data transmission(3 Ethernet port) | Support |
Serial data transmission(1 channel RS232 or TTL) | Support |
Transmission range | 2~10km( ground to ground), maximum 100km( UAV to ground) |
Management | Trough Web UI or Control uart |
Encryption | AES128-bit encryption |
Network mode | Mesh |
Movement speed | Support maximum 300km/h |
Power input | 24~30V |
Power consumption | <2A at 12V |
Dimensions | 113.9*83.7*23.3 mm |
Weight | 243g |
Input/ Output | Description |
Ethernet | 3 channel 4Pin PH1.25mm connector, bridged inside with same IP address |
Data UART | RS232 data UART(RS232 as default, optional TTL before shipping out), 3PIN PH1.25mm connector |
Control UART | TTL control UART, 3PIN PH1.25mm connector |
Power in | XT30PW-M connector |
ANT 1 | Tx/Rx Antenna port, SMA female |
ANT 2 | Tx/Rx Antenna port, SMA female |
Wireless networking with HCL605-5W UAV video transmitter:
Mesh transmitting
This HCL605 5W UAV video transmitter supports mesh network with maximum 32 nodes and shared maximum 100Mbps Iperf Throughput. Here the version we recommended maximum support 4 nodes- 2 hops and shared 60Mbps. Price is much more competitive.
HCL605-5W UAV video transmitter Drawing
FAQ
Q1. Does it support any other cameras except IP camera?
A: IP camera video can be connected with HCL605 directly via Ethernet port. HDMI/SDI/AHD/AV camera video can be encoded with our SE10/SE11 encoder and then work with HCL605 via Ethernet connection.