
Add to Cart
The HC-T820 COFDM transmitter module combines COFDM modulation with H.265/H.264 encoding for low-latency video/audio transmission in high-speed and NLOS conditions. The modular design features separate video codec encoder and COFDM modulator boards connected via flat cable, plus a transparent UART transmission channel.
HD video input | HDMI Type A connector |
Composite video input | 4PIN PH1.5mm connector (CVBS Analog Audio Video Input) |
UART Data | 3PIN 1.5mm pitch connector (default TTL3.3V, optional RS232) |
UART Control | 4PIN PH1.5mm connector (TTL3.3V) for Config Panel or host computer |
Power input | 2PIN PH2.0mm connector (12V Power Supply) |
RF output | IPEX connector |
Modulation | COFDM (DVB-T) |
IFFT mode | 2K |
Bandwidth | 1MHz~8MHz adjustable (1KHz steps) |
FEC | 1/2, 2/3, 3/4, 5/6, 7/8 |
Guard interval | 1/32, 1/16, 1/8, 1/4 |
Constellation | QPSK, 16QAM, 64QAM |
Code stream | 0.5Mbps to 31.67Mbps |
Frequency range | 200MHz~2300MHz (custom bands available) |
Tuning resolution | 1KHz steps |
Output power | -93dBm to -5dBm (frequency dependent) |
Video inputs | Automatic detection of HDMI (priority) or AV input |
Supported formats | 1080@60P/50P/30P/25P/24P/60I/50I/30I, 720@60P/50P/30P, NTSC, PAL |
Video encoding | H265/H264 |
Audio input | HDMI embedded or analog (Mic/Line selectable) |
Audio format | AAC, 16bit, stereo, 32Kbps |
Latency | H265: 200-250ms; H264: 50-130ms |
Operating temperature | 0° to +70°C (optional -40° to +85°C) |
Storage temperature | -40° to +85°C |
Dimensions | 70×45×14mm (excluding connectors) |
Power requirements | 7-24VDC, <340mA@12V |
COFDM Receiver Technical Specifications:
Demodulation | |
Demodulation formats | COFDM(DVB-T) |
Carriers | 2K |
Bandwidth | 1MHz~8MHz, step by 1KHz |
FEC | 1/2, 2/3, 3/4, 5/6, 7/8 |
Guard interval | 1/32, 1/16, 1/8, 1/4 |
Constellation | QPSK, 16QAM, 64QAM |
Bitrates | 0.5Mbps to 31.67Mbps |
RF | |
Frequency Bands | 160MHz~4000MHz |
Tuning Step size | 1KHz |
Sensitivity | -97±1dBm(BW=8MHz, QPSK, CR=2/3, GI=1/16) for one channel and add 3dBm for two channels |
Video and Audio | |
Video output | HDMI and CVBS, Ethernet(RTSP protocol by default, option UDP), USB |
Video formats | 1080P or 720P 720*480 60I(NTSC), 720*576 50I(PAL) |
Video Decoding | MPEG-4/H.264 AVC |
Audio output | Embedded HDMI and AV audio |
Audio Decoding | AAC |
Decryption | AES256 |
Storage | USB disk or micro SD card |
Others | |
Monitoring and control | setup with Config Panel or Windows PC or other device via control UART. |
Temperature range | 0° to +70°C Ambient |
Storage Temperature | –40° to +80°C |
Receiver board size | 109.4 * 86mm |
Input voltage | 7~28VDC |
Power consumption | <300mA@12V |
Difference bettween the two kinds of COFDM Receiver Modules: