Hincn Limited
Hincn Limited
Add to Cart
Broadband, up to 40MHz bandwidth
The HCL605 full duplex communication transceiver adopts a combination of advanced time division processing technology,TDD two-way network transmission, and leading OFDM modulation technology, providing a complete two-way AES128 encryption network data transmission channel, anti multipath interference, high-speed mobile data, and voice transmission.
The subcarrier frequencies can be flexibly assigned to multiple user terminals, enabling multi-path access to multiple terminals within the same frequency range. In non-line-of-sight(NLOS) and high-speed mobile environments, real-time two-way transparent information transmission can be achieved. Multiple wireless networks can be integrated with each other to form a large-scale network coverage.
Due to its small size and light weight, it is particularly suitable for applications in complex environments such as UAV (unmanned aircraft), high-speed railways, maritime rescue, navigation communication, etc.
| Attribute | Value |
|---|---|
| Name | TDD Duplex 100km Ethernet Transceiver Maritime Mesh Networking Communication System |
| Modulation | TDD OFDM |
| Frequency | 566~678MHz and 1420~1530MHz |
| Bandwidths | 1.4/3/5/10/20/40MHz |
| Throughput | Maximum 100Mbps |
| RF transmission Power | 5W *2 (Each 5W of the 2 antennas) |
| Constellation | QPSK,16QAM,64QAM, self-adaption |
| Sensitivity | -102dBm(1Mbps at 20MHz) |
| IP data transmission | 3 Ethernet port |
| Serial data transmission | 1 channel RS232 or TTL |
| Transmission range | 2~10km (ground to ground), maximum 100km (UAV to ground) |
| Management | Through Web UI or Control uart |
| Encryption | AES128-bit encryption |
| Network mode | Mesh |
| Movement speed | Support maximum 300km/h |
| Power input | 24~30V |
| Power consumption | <2A at 12V |
| Dimensions | 113.9*83.7*23.3 mm |
| Weight | 243g |
| Port | Description |
|---|---|
| Ethernet | 3 channel 4Pin PH1.25mm connector, bridged inside with same IP address |
| Data UART | RS232 data UART (RS232 as default, optional TTL before shipping out), 3PIN PH1.25mm connector |
| Control UART | TTL control UART, 3PIN PH1.25mm connector |
| Power in | XT30PW-M connector |
| ANT 1 | Tx/Rx Antenna port, SMA female |
| ANT 2 | Tx/Rx Antenna port, SMA female |
This HCL605 5W full duplex transceiver supports mesh network with maximum 32 nodes and shared maximum 100Mbps Iperf Throughput. Here the quotation we provided is based on the version maximum support 4 nodes- 2 hops and shared 60Mbps. Price is much more competitive. For higher version, just contact for more information.